Figure 8-23 Installing The Code Rom Simm - Tektronix PHASER 560 Service Manual

8
FRU Disassembly/Assembly
Replacing the code ROM SIMM
8-36 Phaser 560 Color Printer
Downloaded from www.Manualslib.com
1.
Turn off the printer. Do not unplug the printer; this preserves a
ground path to dissipate static charges.
2. If installed, loosen the Extended Features SIMM by spreading the
pawls securing it in its connector. This creates the clearance need to
remove the Postscript ROM SIMM.
3. Remove the PostScript ROM SIMM by spreading the pawls securing it
in its connector.
4.
Install the new PostScript code ROM SIMM. When properly inserted,
a tab on each end of the connector slips into a hole on each end of the
ROM SIMM. Also, a pawl on each end of the connector latches
around each end of the ROM SIMM to lock it in place.
5.
Reinstall the image processor board.
Image
processor
board
PostScript
ROM SIMM
PostScript
ROM SIMM
connector

Figure 8-23 Installing the code ROM SIMM

6. Turn on the printer and print a startup page to check the printer's
performance.
manuals search engine
Extended
a
Features SIMM
Insert SIMM and push flat into catch
b
Extended
Features SIMM
9697-23