Tektronix PHASER 560 Service Manual page 36

2
Installing the Printer and Drivers
2-4 Phaser 560 Color Printer
Downloaded from www.Manualslib.com
Driver software must be installed on the host computer to use the printer to its
fullest potential. A host computer must meet the following conditions:
Mac
Mac II, Performa, Centris or Quadra, PowerMac or PowerBook.
CD-ROM
System 6.0.7 or later
4 Mbytes RAM
PC
IBM AT, PS/2 or compatible, with a 386 or later CPU, 3.5-inch floppy
drive, CD-ROM drive, hard disk drive and 2 Mbytes RAM
DOS system
DOS 3.1 or later
An application that supports color PostScript or HP-GL
Windows systems
Windows 3.1, Windows NT or Windows 95
2 Mbytes of hard disk space
Workstation
UNIX workstations: The X Window System,
SUN workstations: Solaris 1.1 (BSD), Solaris 2.x (Sys V)
DEC: Ultrix, VMS, OpenVMS
HP: HP-UX
SGI: IRIX
IBM RS6000: AIX
750 kbyte hard disk space for files
Based on the results of the pre-install interview with the customer, you may
wish to access the Tektronix web page www.tek.com/Color_Printers. The
support web pages contain the latest software, drivers and installation guides.
manuals search engine