Tektronix PHASER 560 Service Manual page 71

Downloaded from www.Manualslib.com
1. Use a text editor or word processor to modify the DEVPARAMS.PS
file. (Be sure to save the file as a text-only file.) Substitute the values
you want for the values used in the sample DEVPARAM.PS. The
possible values for each parameter are listed in the following table.
The values are case-sensitive; they must be entered exactly as shown.
Table 2-2 Values for modifying the DEVPARAMS.PS file
Parameter key
FlowControl
Parity
DataBits
StopBits
Baud rate
Enabled
CheckParity
On
Interpreter
Protocol
2. Use the DOS COPY command to send DEVPARAM.PS to the printer;
for example: COPY DEVPARAM.PS COM1: (Substitute the
appropriate port for COM1:.)
3. Similarly, use the DOS COPY command to send CTRLD.PS to the
printer
manuals search engine
Installing the Printer and Drivers
Allowed Values
XonXoff (software)
DTR (hardware)
Even
Odd
None
Space
7
8
1
2
300
600
1200
2400
4800
9600
19200
38400
true
false
true
false
true
false
PostScript
HP7475A
LaserJet III
Normal
Raw
Binary
TBCP
Types
string
string
integer
integer
integer
boolean
boolean
boolean
string
string
2-39
Service Manual
2