7500-XXX
MPF pick solenoid / pick lever removal
1.
Remove the MPF rear cover. See
2.
Remove the MPF feed unit assembly. See
3.
Remove the MPF feed drive gear group. See
4.
Remove one screw securing the pick solenoid (A).
5.
Disconnect the connector from the pick solenoid (A).
6.
Remove the MPF pick solenoid (A).
Note: When removing the pick solenoid (A), lower the actuator (B).
7.
Remove the pick lever (B).
8.
Remove the spring (C).
Rear
4-62
MFP Service Manual
"MPF rear cover removal" on page
"MPF feed unit assembly removal" on page
"MPF feed drive gear group removal" on page
C
B
Actuator
4-58.
4-54.
4-59.
A