Removing Yourself From A Conference - Nortel Compact ICS 7.1 Coordinator Manual

Removing yourself from a conference

You can remove yourself from a conference, and connect the other two
callers through your Norstar system.
Enter the Transfer feature code
When you remove yourself from a conference using the Transfer feature,
and both callers are from outside your system, one of the callers must have
called you on a disconnect supervised line, or the call is disconnected.
Displays
3 parties only
Conf. on hold
Conference busy
Line001 21
TRANSFER
Press held line
For other displays, see ''Common feature displays'' on page 243.
N0130955 01
≤‡‚
You are trying to add a fourth party to your
conference call, or to join two conferences
together. Release one call from the conference
before adding another, or keep the two
conferences separate.
You have put a conference call on hold.
You have tried to make a conference call, but your
system is already handling its maximum of four
conference calls.
You are on a conference with the two lines or
telephones shown. You can drop out of the
conference and leave the other two parties
connected (Unsupervised Conference) by
pressing TRANSFER or entering the Transfer feature
code.
You have activated the Conference feature with
one call active and another on hold. Press the line
of the call on hold to bring that person into the
conference.
Answering calls / 61
.
Compact ICS 7.1 System Coordinator Guide