Assigning Or Unassigning Lines To A Group - Nortel ICS 6.1 Manual

174 / Programming Hunt Groups
5. Press
Hunt Group. The display shows the member number followed by an
arrow.
6. Enter the new position number for the extension.
¨
7. Press

Assigning or unassigning lines to a group

You can assign one or several lines to a hunt group.
Hunt group line notes:
• Configure the prime set for a Hunt Group line to
ring transfer of external Hunt Group calls to the prime set before the
Hunt Group can receive the call.
• A line can be assigned to only one group.
• Do not assign any hunt group lines to individual telephones. If any of
the telephones that are part of the hunt group have the line assigned,
remove the line from the telephone before assigning it to the hunt
group.
1. At
2. Enter the Hunt Group number you want to program (1-6) or press
3. Press
4. Press
5. Press
6. Enter the line number you want to program and press
first line assigned to this group, or press
the system.
7. Press
¨
8. Press
Compact ICS 6.1 System Coordinator Guide
to move an existing member to another place within the
to exit or
, press
to scroll through the groups.
. The display shows
. The display shows
. The display shows
to program the line as
means the line is assigned to another Hunt Group.
to exit or
to continue programming.
. The display shows
.
.
to go to the first line in
or
to continue programming.
to avoid delayed
.
.
to go to the
.
P0603544 02