Nortel ICS 6.1 Manual page 224

224 / Using System features
For other displays, see ''Common feature displays'' on page 253.
Services that have been turned on automatically are indicated by an asterisk
(*) before the name on the display. You can neither manually activate nor
cancel automatically-scheduled services, although you can override them
by manually turning on another schedule.
The control telephone can override Services that are turned on and off
according to a schedule at any time by entering a Services feature code, and
then by selecting a different schedule. This override remains in effect until
it is canceled. If you select a schedule with an asterisk (*), the next
automatic service schedule comes into effect at the programmed time.
Direct-dial calls to a direct-dial telephone ring at the extra-dial telephone
(the extra-dial telephone is designated by your installer or customer service
representative) only when you enter the Ringing service feature code
²
¡ à Ú
(
telephone is activated, not the actual Ringing service (unless that
direct-dial telephone is a control telephone).
Tip -
Night, Lunch, Evening, Sched 4, Sched 5, and Sched 6.
Your installer or customer service representative can
change these names to suit your business.
Compact ICS 6.1 System Coordinator Guide
There is a Service active in your system. Press
or
) at that direct-dial telephone. Note that only the extra-dial
Norstar provides six service schedules named
to view the active Services.
P0603544 02