Turning Services On And Off - Nortel ICS 6.1 Manual

220 / Using System features
alternate routes are offered only in the case where the original route
is not available. Refer to the section on least-cost routing in the
Compact ICS Installer Guide.

Turning Services on and off

The master control for how different services and their schedules are used
by your system is in programming. There are three settings:
• Manual allows you to turn the service on and off at any time from a
control telephone using a feature code.
• Automatic allows you to use the preassigned stop and start time for a
service. You are able to start and stop the service by entering the
appropriate feature code at a control telephone. If you select this
setting, you use the start and stop times programmed by your installer
or customer service representative.
• Off prevents the service from being activated.
You need the programming template found at the front of this guide. See
''Getting started with Norstar'' on page 15 for more information.
²
1. Press
Û Ü ß Ý ß
2. Press
3. Press
4. Press
5. Press
6. Press
to program.
7. Press
for your office:
Each schedule can have its own configuration of a Service which works
independently of automatic start and stop times. For example, there may be
a version of Restriction service called Night Schedule that prevents anyone
from making long distance calls. But calling it Night Schedule does not
mean it can only be used with a schedule. You can turn the Night Schedule
for Restriction Service on or off, as needed, any time of the day or night. If
Compact ICS 6.1 System Coordinator Guide
and .
¥ ¥ Û ß ß Ü Ý Ý
(the default System Coordinator password).
twice.
at
until you see the Service you want to program.
and
and use
,
.
.
until you see the schedule you want
to select the setting that works best
or .
,
P0603544 02