Programming Room Information - Nortel ICS 6.1 Manual

Programming room information

Use this setting to assign set DNs to a specific room.
1. Place the appropriate programming overlay on the set you are using to
do programming.
²
2. Press
Û Ü ß Ý ß
3. Press
4. Press
5. Press
6. Press
7. Enter a room set number or press
find the DN of the set you want to assign to a room.
8. Press
9. Press
10. Press
11. Press
requirements.
Call restrns
Call restrictions can be set up by the system administrator. Refer to the
Compact ICS Installer Guide for details.
Service times
You can set the time when occupied rooms change from Service done to
Service required. This setting affects the Room condition feature.
1. Place the appropriate programming overlay on the set you are using to
do programming.
²
2. Press
P0603544 02
¥ ¥ Û ß ß Ü Ý Ý
.
(ADMIN). The display shows
.
until the display shows
until
.
.
and enter the room number, then press
.
and choose or , depending on your security
¥ ¥ Û ß ß Ü Ý Ý
.
Using the Hospitality features / 187
(CONFIG). The display shows
displays.
.
and press
displays.
displays
(CONFIG). The display shows
Compact ICS 6.1 System Coordinator Guide
.
until you
.