Nortel ICS 6.1 Manual page 150

150 / Customizing your telephone
Displays
For other displays, see ''Common feature displays'' on page 253.
Compact ICS 6.1 System Coordinator Guide
The name of the feature assigned to a button is
displayed when you press the button.
appears when there is more information
£
available. Press
information.
If you are checking a speed dial button, enter
the three-digit speed dial code that you want to
check.
Enter the feature code, or press
quit programming or
you have entered. The system accepts the
entry as soon as you enter a valid feature code.
²
Press and enter the feature code you want
to assign to the button. You cannot enter invalid
codes.
You have programmed a button with a feature
that was already programmed onto another
button. The feature has moved to the button
you just programmed. Its original button is now
blank.
Press the button you want to check. Press
or when you are finished.
Enter the number you want to program and
³
press . To erase the button, just press
³
.
Enter the number you want to program and
press . To erase the button, just press
or .
or for additional
¨
or
to clear the numbers
P0603544 02
to
²
³