Changing Button Programming - Nortel ICS 6.1 Manual

166 / User Preferences
User Preferences programming is available under
under the heading
Sub-headings in User Preferences
User prefernces
Model
Button prgrming
User speed dial
Call log opt'ns
Dialing opt'ns
Language
Display cntrst
Ring type

Changing button programming

Press
buttons on the telephone (an example is shown in Displays at the end of this
section).
If the telephone has a CAP module, you can press
buttons on the module.
Press
to ''Default button assignments'' on page 161 for button number mapping
for each type of Business Series Terminal and Norstar M-series telephones.
Use the display buttons to change the programming for a button. User
Preferences programming cannot change the buttons that are used by lines,
intercom, and the handsfree feature, which are assigned by the system
administrator. Refer to the Compact ICS 6.1 Installer Guide for details.
The display buttons used in button programming
Moves you out of a setting without making any changes to it.
Erases the button.
Programs the key as an autodial number for an internal or an
external number. If it is an external autodial number, you have to
choose a line, line pool, or the routing table for the call to use.
Compact ICS 6.1 System Coordinator Guide
at
to move through all the buttons on the telephone. Refer
.
. The display shows the number of
or to see the
P0603544 02