Assigning A Distinctive Ring Pattern To A Hunt Group - Nortel ICS 6.1 Manual

¨
6. Press
Assigning a distinctive ring pattern to a
Hunt Group
You can assign distinctive ring patterns to your Hunt Group so that calls
can be rated in priority for the group. These distinctive ring patterns, have
the same characteristics as for line and extension distinctive ring patterns.
Refer to ''Changing the ring on the telephone'' on page 168.
The Hunt Group distinctive ring pattern determines how a call will ring
within the Hunt Group. If members of the group have ring patterns
assigned to their telephones that are higher than the ring patterns of the
incoming line or the Hunt Group, then the Hunt Group will use the ring of
the corresponding member telephones.
If the incoming call (line) has a higher ring pattern assigned than the Hunt
Group, the Hunt Group will ring with the line ring pattern.
1. Find the heading
2. Press
3. Enter the Hunt Group number you want to program (1-30).
4. Press
5. Press
6. Press
to the Hunt group line. (
¨
7. Press
P0603544 02
to exit or
. The display shows
The display shows
until the display shows
to toggle to the ring pattern number you want to assign
to exit or
Programming Hunt Groups / 179
to continue programming.
.
)
to continue programming.
Compact ICS 6.1 System Coordinator Guide
.
.
.