Turning Ccr On Or Off; Choosing The Attendant Telephone - Nortel ICS 6.1 Manual

Because System Answer answers calls and then puts them on hold, the
feature should be turned off when no one is at the telephone to retrieve the
calls.
Tip -
System Answer and CCR on or off on a memory button
with an indicator at the attendant telephone. You know
that the feature is turned on when the indicator is lit at the
attendant set.

Turning CCR on or off

² ¥ ¡ Ü Û
1. Press
2. Press
Basic password (the default passwords are
Û Û à Ý Û
3. Press
See the section on recording greetings for a description of the
Business Open and Business Closed greetings used with CCR.

Choosing the attendant telephone

Programming allows you to choose a telephone to be the attendant
telephone (attendant set). External calls that go unanswered at this
telephone are handled by System Answer.
You need the programming template found at the front of this guide. See
''Getting started with Norstar'' on page 15 for more information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
The display shows
3. Press
4. Press
internal number of the current attendant telephone.
P0603544 02
You can program the feature code for turning
. The display shows the current status of CCR.
£
or and enter the System Coordinator password or
) to select a setting:
¥
or to confirm the change.
(the default System Coordinator password).
twice. The display shows
,
Û Ü ß Ý ß
,
.
.
, and . The display shows the
Compact ICS 6.1 System Coordinator Guide
Auto Attendant / 87
² ¥ ¡ Ü Û
and
, or .