Setting The Name; Allowing/Disallowing An Auxiliary Ringer - Nortel ICS 6.1 Manual

178 / Programming Hunt Groups
6. Press
7. Enter the new overflow position.
¨
8. Press

Setting the name

This setting allows you to program the Hunt Group name, such as
SERVICE or SALES. The name can be up to seven characters in length.
This name becomes the CLID display name when the DN is called.
1. At
2. Enter the Hunt Group number you want to program (1-6) or press
3. Press
4. Press
5. Press
6. Using the dialpad, enter the name of the Hunt Group.
7. Press
¨
8. Press

Allowing/disallowing an auxiliary ringer

This setting allows you to allow/disallow an external ringer to sound when
a call comes in for a specific hunt group. If you allow this service, you must
have an auxiliary ringer properly installed on your system. Refer to ''Using
an auxiliary ringer'' on page 232.
1. At
2. Enter the Hunt Group number you want to program (1-6) or press
3. Press
4. Press
5. Press
disallow an auxiliary ringer.
Compact ICS 6.1 System Coordinator Guide
to change the overflow position.
to exit or
, press
to scroll through the groups.
. The display shows
. The display shows
.
to store the name.
to exit or
, press
to scroll through the groups.
. The display shows
until the display shows
to choose (yes) to turn the ringer on or (No) to
to continue programming.
. The display shows
.
.
to continue programming.
. The display shows
.
.
.
.
P0603544 02