Nortel CallPilot NN44200-700 Troubleshooting Manual page 116

116 Chapter 5 Routing and remote access troubleshooting
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Action
Connect to the CallPilot server using Dial-Up Networking. Use
the NGenDist or NGenSys accounts because these accounts are
enabled for dial-up access. You will need the password for the
account.
Note: The details of using Dial-up Networking vary depending
on which version of Windows Operating System is running on
the Client PC. Refer to the CallPilot NTPs, Windows Help, or
other Microsoft documentation for details.
Right-click the connection icon in the system tray and choose Status
(or just double-click the icon).
Result: The RAS Status window appears.
To obtain the IP address, select the Details tab and read the Server
IP Address.
Click Close on the Dial-Up Networking Status window.
Nortel CallPilot
Troubleshooting Reference Guide
NN44200-700 01.05 Standard
5.0 26 June 2007
—End—