Atm Interface Commands - Alcatel-Lucent 7705 Interface Configuration Manual

Card, Adapter Card, and Port Command Reference

ATM Interface Commands

atm
Syntax atm
Context config>port>multilink-bundle>ima
config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
config>port>sonet-sdh>path
Description This command enables the context to configure ATM interface properties.
cell-format
Syntax cell-format cell-format
Context config>port>multilink-bundle>ima>atm
config>port>tdm>ds1>channel-group>atm
config>port>tdm>e1>channel-group>atm
config>port>sonet-sdh>path>atm
Description This command configures the ATM cell format.
Parameters cell-format — the ATM cell format, either UNI or NNI (SONET/SDH ports do not support the NNI
min-vp-vpi
Syntax min-vp-vpi value
Context config>port>multilink-bundle>ima>atm
config>port>tdm>ds1>channel-group>atm
config>port>tdm>e1>channel-group>atm
config>port>sonet-sdh>path>atm
Description
This command sets the minimum allowable virtual path identifier (VPI) value that can be used on the
ATM interface for a VPC.
Default 0
Page 112
format)
Values
uni (user-to-network interface)
nni (network-to-network interface cell format)
7705 SAR OS Interface Configuration Guide