Alcatel-Lucent 7705 Interface Configuration Manual page 108

Card, Adapter Card, and Port Command Reference
mrru
Syntax mrru mrru
no mrru
Context config>port>multilink-bundle
Description This command specifies the maximum received reconstructed unit (MRRU), which is similar to a
maximum transmission unit (MTU) but applies only to MLPPP multilink bundles. The MRRU is the
maximum frame size that can be reconstructed from multilink fragments. This command is only valid
for MLPPP bundles.
The no form of this command resets the MRRU to the default.
Default 1524
Parameters bytes — the maximum received reconstructed unit size, expressed as an integer
red-differential-delay
Syntax red-differential-delay red-diff-delay [down]
no red-differential-delay
Context config>port>multilink-bundle
Description This command sets the maximum acceptable differential delay for individual circuits within a
multilink bundle.
The no form of this command restores the red-differential-delay defaults.
Default None
Parameters
red-diff-delay — the maximum red differential delay value, in milliseconds
down — transition the circuit that exceeded the differential delay to a down state (for example,
Page 108
Values 1500 to 1572 bytes
Values
0 to 25 ms for MLPPP bundles
0 to 75 ms for IMA bundles
remove it from the multilink bundle from an operational perspective)
7705 SAR OS Interface Configuration Guide