Alcatel-Lucent 7705 Interface Configuration Manual page 171

7705 SAR OS Interface Configuration Guide
Table 18: Show Port Detail Output Fields (TDM DS1 Interface) (Continued)
Label
Octets input/output
Packets input/output
Errors input/output
DS1/E1 Line
ES
SES
SEFS
UAS
CSS
PCV
LES
BES
LCV
Transmit
Receive
Description
The total number of octets received and transmitted on the port
The number of packets, delivered by this sub-layer to a higher
(sub-) layer, which were not addressed to a multicast or
broadcast address at this sub-layer. The total number of packets
that higher-level protocols requested be transmitted, and which
were not addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not sent.
For packet-oriented interfaces, the number of inbound packets
that contained errors preventing them from being deliverable to
a higher-layer protocol. For character-oriented or fixed-length
interfaces, the number of inbound transmission units that
contained errors preventing them from being deliverable to a
higher-layer protocol.
For packet-oriented interfaces, the number of outbound packets
that could not be transmitted because of errors. For character-
oriented or fixed-length interfaces, the number of outbound
transmission units that could not be transmitted because of
errors.
DS1/E1 Line statistics
The number of Errored Seconds errors
The number of Severely Errored Seconds errors
The number of Severely Errored Framing Seconds errors
The number of Unavailable Seconds errors
The number of Controlled Slip Seconds errors
The number of Path Code Violations errors
The number of Line Errored Seconds errors
The number of Bursty Errored Seconds alarms
The number of Line Code Violations errors
Transmit statistics:
FE-LOF — the number of far-end loss of frame errors
AIS — the number of alarm indication signal errors
Receive statistics:
FE-LOF — the number of far-end loss of frame errors
AIS — the number of alarm indication signal errors
LOS — the number of loss of signal errors
LOF — the number of loss of frame errors
7705 SAR Interfaces
Page 171