Alcatel-Lucent 7705 Interface Configuration Manual page 149

Sample Output
*A:ALU-1># show port 1/1
==============================================================================
Ports on Slot 1
==============================================================================
Port
Id
------------------------------------------------------------------------------
1/1/1
1/1/2
1/1/3
1/1/3.sts3
1/1/4
1/1/4.sts3
==============================================================================
*A:ALU-1>#
A:ALU-1># show port 1/3
==============================================================================
Ports on Slot 1
==============================================================================
Port
Id
------------------------------------------------------------------------------
1/3/1
1/3/1.1
1/3/2
1/3/2.1
1/3/3
1/3/4
1/3/5
1/3/6
1/3/6.6
*A:ALU-1>#
7705 SAR OS Interface Configuration Guide
Table 12: Show General Port Output Fields (Continued)
Label Description
The Link Aggregation Group (LAG) or multilink bundle to which a TDM
LAG/Bndl
port is assigned
network — the port is configured for transport network use
Port Mode
access — the port is configured for service access
The encapsulation type on the port (null or dot1q for Ethernet; atm, cem,
Port Encp
ipcp, or ppp-auto for TDM; atm for SONET/SDH)
The type of port or optics installed
Port Type
The SFP type on an Ethernet port (Ethernet, Fast Ethernet, or GigE)
SFP/MDI MDX
Admin Link Port
State
Down No
Down No
Down No
Up No
Down No
Up No
Admin Link Port
State
Down No
Down No
Down No
Down No
Down No
Down No
Down No
Down No
Down No
Cfg Oper LAG/ Port Port Port
State MTU MTU Bndl Mode Encp Type
Ghost
Ghost
Ghost
Ghost 1572 1572 - accs atm
Ghost
Ghost 1572 1572 - accs atm
Cfg Oper LAG/ Port Port Port
State MTU MTU Bndl Mode Encp Type
Ghost
Ghost 1572 1572 - accs ipcp tdm
Ghost
Ghost 512 512 1 accs ipcp tdm
Ghost
Ghost
Ghost
Ghost
Ghost 1572 1572 - accs cem
7705 SAR Interfaces
SFP/XFP/
MDIMDX
sonet
sonet
SFP/XFP/
MDIMDX
tdm
Page 149