Alcatel-Lucent 7705 Interface Configuration Manual page 178

Card, Adapter Card, and Port Command Reference
Page 178
Table 20: Show Port ACR Detail Output Fields (Continued)
Label
CEM SAP Configuration Information
Endpoint Type
Bit-rate
Payload Size
Jitter Buffer
Use RTP Header
CAS Framing
Effective PDVT
Cfg Alarm
Alarm Status
Internal Digital Phase Locked Loop (DPLL) Statistics
ACR DPLL
Statistics
Description
The type of endpoint
The number of DS0s or timeslots in the channel group
The number of octets contained in the payload of a TDM PW packet
when the packet is transmitted
The size of the receive jitter buffer, expressed in milliseconds
Whether RTP headers are used in CES packets (Yes or No)
The type of CAS framing
The peak-to-peak packet delay variation (PDV) used by the circuit
emulation service
Since the operating system may adjust the jitter buffer setting in order
to ensure no packet loss, the configured jitter buffer value may not be
the value used by the system. The effective PDVT provides an
indication that the PDV has been adjusted by the operating system.
The alarms that have alarm reporting enabled
The current alarm state (for example, stray, malformed, packet loss,
overrun, underrun, remote packet loss, remote fault, or remote RDI)
frequency offset mean — the ACR frequency offset mean for
the previous 15 sets of 60-second intervals
frequency offset stddev — the ACR frequency offset
standard deviation for the previous 15 sets of 60-second intervals
phase error mean — the ACR input phase error mean and
output DCO mean for the previous 15 sets of 60-second intervals
phase error stddev — the ACR input phase error standard
deviation and output DCO standard deviation for the previous 15 sets
of 60-second intervals
7705 SAR OS Interface Configuration Guide