Alcatel-Lucent 7705 Interface Configuration Manual page 111

test-pattern
Syntax test-pattern pattern
no test-pattern
Context config>port>ml-bundle>ima>test-pattern-procedure
Description This command specifies the transmit test pattern in an IMA group loopback operation. This value can
only be changed when the test-pattern-procedure command is shut down.
The no form of this command restores the test pattern to the default.
Default 0
Parameters pattern — specifies an integer taking the following values:
shutdown
Syntax [no] shutdown
Context config>port>ml-bundle>ima>test-pattern-procedure
Description This command enables a configured IMA test pattern procedure.
The no form of this command disables the IMA test pattern procedure.
version
Syntax version IMA-version
no version
Context config>port>ml-bundle>ima>
Description This command configures the IMA version for the multilink bundle group. If there is a version
mismatch between this IMA group and the far-end IMA group, the IMA group will go operationally
down. In Release 2.0 of the 7705 SAR, only IMA version 1.1 is supported.
Default
1-1
Parameters IMA-version — specifies the IMA version for this group
7705 SAR OS Interface Configuration Guide
Values 0 to 255
Values 1-1 — IMA version 1.1
7705 SAR Interfaces
Page 111