Alcatel-Lucent 7705 Interface Configuration Manual page 130

Card, Adapter Card, and Port Command Reference
Sample Output
The following examples display the card state for a 7705 SAR-8 and a 7705 SAR-F.
Note: The show card command for the 7705 SAR-F will always appear as shown because
it has a fixed physical configuration.
For the 7705 SAR-8:
ALU-1>config# show card state
Card State
===============================================================================
Slot/
Id
-------------------------------------------------------------------------------
1
1/1
1/2
1/3
1/4
1/5
1/6
A
B
===============================================================================
For the 7705 SAR-F:
ALU-2# show card
===============================================================================
Card State
===============================================================================
Slot/
Id
-------------------------------------------------------------------------------
1
1/1
1/2
A
================================================================================
ALU-2>#
Page 130
Table 5: Show Card State Output Fields (Continued)
Label
Num MDA
Comments
Provisioned
Type
iom-1g
a4-oc3
a4-oc3
a16-chds1
a16-chds1
a8-eth
a8-eth
csm-1g
csm-1g
Provisioned
Type
iom-1g
a16-chds1
a8-ethv2
csm-1g
Description
The number of adapter cards installed
Indicates which CSM is the active card and which is in standby mode
(for redundancy)
Equipped Admin Operational
Type State State
iom-1g up
up
up
a16-chds1 up
a16-chds1 up
a8-eth up
a8-eth up
csm-1g up
up
Equipped Admin Operational
Type State State
iom-1g up
a16-chds1 up
a8-ethv2 up
csm-1g up
7705 SAR OS Interface Configuration Guide
Num Num Comments
Ports MDA
up 6
provisioned 4
provisioned 4
failed 16
failed 16
up 8
up 8
up
down
Num Num Comments
Ports MDA
up 2
provisioned 16
provisioned 8
up
Active
Standby
Active