Alcatel-Lucent 7705 Interface Configuration Manual page 91

efm-oam
Syntax efm-oam
Context config>port>ethernet
Description This command configures EFM-OAM attributes.
accept-remote-loopback
Syntax [no] accept-remote-loopback
Context config>port>ethernet>efm-oam
Description This command enables reactions to loopback control OAM PDUs from peers.
The no form of this command disables reactions to loopback control OAM PDUs.
mode
Syntax mode {active | passive}
Context config>port>ethernet>efm-oam
Description
This command configures the mode of OAM operation for this Ethernet port.
Active mode causes the port to initiate the negotiation process and continually send out
efm-oam information PDUs. Passive mode waits for the peer to initiate the negotiation process. A
passive mode port cannot initiate monitoring activities (such as loopback) with the peer.
Default active
transmit-interval
Syntax [no] transmit-interval interval [multiplier multiplier]
Context config>port>ethernet>efm-oam
Description This command configures the transmit interval of OAM PDUs.
Parameters interval — specifies the transmit interval
multiplier — specifies the multiplier for the transmit-interval to set the local link down timer
7705 SAR OS Interface Configuration Guide
Values 1 to 600 (in 100 ms)
Values 2 to 5
7705 SAR Interfaces
Page 91