Alcatel-Lucent 7705 Interface Configuration Manual page 218

Card, Adapter Card, and Port Command Reference
Fabric Profile Statistics Monitor Commands
fabric-profile
Syntax fabric-profile mda {mda-id | with-stats-enabled} {dest-mda | source-mda} [interval
seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command enables monitoring of adapter card fabric profile statistics. The specified adapter card
statistical information displays and automatically refreshes at the configured interval.
Parameters mda-id — the slot number of the adapter card
with-stats-enabled — if used, this keyword replaces the mda-id parameter, in which case the adapter
seconds — configures the interval for each display in seconds
repeat — configures how many times the command is repeated
absolute — displays the raw statistics without processing. No calculations are performed on the delta
rate — displays the rate-per-second for each statistic instead of the delta
Page 218
fabric-stats-enabled
card that has
command will be monitor fabric-profile mda with-stats-enabled dest-mda | source-mda. If
there are no adapter cards that have
displayed.
dest-mda — displays network ingress statistics for all adapter cards going towards the fabric
and destined for the specific destination adapter card. Global fabric statistics are also
displayed, as well as the fabric port statistics if the destination adapter card has the collection
of fabric statistics enabled.
source-mda — displays network ingress traffic statistics from the specified adapter card
going towards the fabric and towards a destination adapter card. The sum of traffic
forwarded or dropped is also displayed.
Default 5 seconds
Values 3 to 60
Default 10
Values 1 to 999
or rate statistics.
7705 SAR OS Interface Configuration Guide
configured will be the one which is monitored; that is, the
fabric-stats-enabled
configured, no statistics will be