Alcatel-Lucent 7705 Interface Configuration Manual page 167

7705 SAR OS Interface Configuration Guide
Table 17: Show Port Detail Output Fields (Ethernet - Access Mode) (Continued)
Label
Port Statistics
Description
Fragments — the total number of packets received that were
shorter than 64 octets (excluding framing bits but including FCS
octets) that had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error)
Jabbers — the total number of packets received that were
longer than 1518 octets (excluding framing bits but including
FCS octets) that had either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error)
Octets — total number of octets received
Packets — number of packets received, broken down by size
Unicast packets input/output — the number of
packets, delivered by this sub-layer to a higher (sub-) layer, which
were not addressed to a multicast or broadcast address at this sub-
layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including those
that were discarded or not sent.
Multicast packets input/output — the number of
packets, delivered by this sub-layer to a higher (sub-) layer, which
were not addressed to a unicast or broadcast address at this sub-
layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
unicast or broadcast address at this sub-layer, including those that
were discarded or not sent.
Broadcast packets input/output — the number of
packets, delivered by this sub-layer to a higher (sub-) layer, which
were not addressed to a unicast or multicast address at this sub-
layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
unicast or multicast address at this sub-layer, including those that
were discarded or not sent.
Discards input/output — the number of inbound
packets chosen to be discarded to possibly free up buffer space
7705 SAR Interfaces
Page 167