Alcatel-Lucent 7705 Interface Configuration Manual page 75

DS1 Commands
config
7705 SAR OS Interface Configuration Guide
— [no] port {port-id}
— tdm
— [no] ds1
— [no] channel-group channel-group-id
— atm
— cell-format
— min-vp-vpi
— crc {16 | 32}
— description description-string
— no description
— encap-type {atm | cem | ipcp | ppp-auto}
— no encap-type
— idle-cycle-flag
— no idle-cycle-flag
— idle-payload-fill
— no idle-payload-fill
— idle-signal-fill
— no idle-signal-fill
— mode {access | network}
— no mode
— mtu mtu-bytes
— no mtu
— network
— queue-policy
— [no] ppp
— keepalive
— no keepalive
— [no] scramble
— [no] shutdown
— timeslots timeslots
— no timeslots
— clock-source {adaptive-timed | loop-timed | node-timed}
— framing (DS1) {esf | sf | ds1-unframed}
— hold-time [up hold-time-up] [down hold-time-down]
— no hold-time
— loopback (DS1) {line | internal | fdl-ansi | fdl-bellcore | payload-ansi}
— no loopback (DS1)
— [no] remote-loop-respond (DS1)
— [no] report-alarm {ais | los | oof | rai | looped}
— [no] signal-mode {cas}
— [no] shutdown
7705 SAR Interfaces
cell-format
value
{flags | ones}
{all-ones | pattern pattern}
{all-ones | pattern pattern}
name
time-interval [dropcount drop-count]
Page 75