Alcatel-Lucent 7705 Interface Configuration Manual page 107

member
Syntax [no] member port-id
Context config>port>multilink-bundle
Description This command binds a channel group that fills up the entire DS1 or E1 link to a multilink bundle.
Up to eight channel groups can be bound to a given multilink bundle. All channel groups must be
from the same adapter card and of the same type (either E1 or DS1).
Up to eight IMA groups can be configured on a 16-port T1/E1 ASAP Adapter card. Up to eight
MPLPPP bundles can be configured on a 16-port T1/E1 ASAP Adapter card.
The no form of this command removes the specified channel group from the multilink bundle.
Default None
Parameters port-id — the physical port ID
minimum-links
Syntax minimum-links minimum-links
no minimum-links
Context config>port>multilink-bundle
Description This command sets the minimum number of links that must be active for the bundle to be active.
If the number of active links drops below the configured minimum, then the multilink bundle will
transition to an operationally down state.
The no form of this command removes the minimum link limit.
Default 1
Parameters minimum-link — the minimum link limit, expressed as an integer
7705 SAR OS Interface Configuration Guide
Syntax: slot/mda/port.channel
Values 1 to 8
7705 SAR Interfaces
Page 107