Dimension ES-4024 Ethernet Switch
del
get
vlan
status
type
22.2.3
EXIT Command
Exit
22.2.4
IP Commands
ip
address
alias
aliasdis
arp
httpd
icmp
ifconfig
ping
route
22-14
Table 22-2 Command Summary: SYS SW
COMMAND
<addr>
<addr>
<802.1q | port-based>
Table 22-3 CLI Command Summary: EXIT
COMMAND
Table 22-4 Command Summary: IP
COMMAND
[addr]
<iface>
<0|1>
status
debug [on|off]
status
discovery <iface> [on|off]
[iface] [ipaddr] [broadcast
<addr> |mtu <value>|dynamic]
<hostid>
DESCRIPTION
Deletes a specific multicast
address
Shows settings of the multicast
address
Displays VLAN status
Sets VLAN mode
DESCRIPTION
Ends the console or telnet
session.
DESCRIPTION
Displays the host IP address.
Sets an alias for the specified
interface.
Disables/enables the alias for the
specified interface.
Displays all interfaces' IP Address
Resolution Protocol status.
Enables or disables the HTTP
debug flag.
Displays the ICMP statistics
counter.
Sets the ICMP router discovery
flag.
Configures a network interface.
Pings a remote host.
Introduction to CLI