ZyXEL Communications dimension ES-4024 User Manual page 144

Dimension ES-4024 Ethernet Switch
trcpacket
version
view
wdog
22-4
Table 22-1 CLI Command Summary: SYS
COMMAND
level [level]
type <bitmap>
disp
clear
call
encapmask [mask]
create <entry> <size>
destroy
channel <name>
[none|incoming|outgoing|bothway]
string [on|off]
switch [on|off]
disp
udp
udp switch [on|off]
udp addr <addr>
udp port <port>
parse [[start_idx], end_idx]
brief
view <filename>
DESCRIPTION
Sets the level (1-10) of trace logs
(1 shows the least) to display.
Uses hexadecimal characters to
set the type of trace logs to record.
Shows the trace log.
Erases the trace log.
Shows call events.
Shows which type of encapsulation
the trace log records or sets it if
you specify the encapsulation's
hexadecimal character.
Creates a packet trace buffer.
Removes the packet trace buffer.
Sets the packet trace direction for
a given channel.
Enables/disables the sending of a
log to the trace packet buffer when
configuration changes are made or
displays the current setting.
Enables/disables packet trace or
displays the current setting.
Displays the trace packets.
Sends the trace packets to another
system using UDP.
Enables/disables the sending of
the trace packets to another
system using UDP or displays the
current setting.
Sets the target IP address for
sending trace packets using UDP.
Sets the UDP port (should match
that of the target IP address) for
sending trace packets using UDP.
Displays detailed packet details of
the packet range specified.
Displays a brief listing of packet
contents.
Displays the RAS code and driver
versions.
Displays the specified text file.
Introduction to CLI