Accessing The Es-4024; Figure 3-7 Uplink Example - ZyXEL Communications dimension ES-4024 User Manual

Dimension ES-4024 Ethernet Switch

Figure 3-7 Uplink Example

3.7 Accessing the ES-4024

You may use the embedded web configurator or command line interface to configure the ES-4024. If you're using
the web configurator, you need Internet Explorer 5.5 and later or Netscape Navigator 6 and later.
You can access the command line interface using a terminal emulation program on a computer connected to the
switch console port (see section 3.1.1) or access the switch via an Ethernet port using Telnet.
When using the command line interface, you can only save STP, 802.1q and 802.1d
configurations using the "config save" command. All other configurations done using the
command line interface are effective only until you restart the switch.
The subsequent parts of this guide discuss configuring the ES-4024 using the web configurator.
Hardware Connections 3-7