ZyXEL Communications dimension ES-4024 User Manual page 155

status
udp
tcp
telnet
traceroute
igmpsnoop
Introduction to CLI
Table 22-4 Command Summary: IP
COMMAND
status
add <dest addr>[/<bits>]
<gateway> [<metric>]
addiface <dest addr>[/<bits>]
<iface> [<metric>]
addprivate <dest addr>[/<bits>]
<gateway> [<metric>]
drop <host addr> [/<bits>]
status
ceiling [value]
floor [value]
irtt [value]
kick <tcb>
limit [value]
mss [value]
reset <tcb>
rtt <tcb> <value>
status [tcb] [<interval>]
syndata [on|off]
trace [on|off]
<host> [port]
<host> [ttl] [wait] [queries]
status
Dimension ES-4024 Ethernet Switch
DESCRIPTION
Displays the routing table.
Adds a route.
Adds an entry to the routing table
for the specified interface.
Adds a private route.
Drops a route.
Displays IP statistic counters.
Displays the UDP status.
Sets the TCP maximum round trip
time.
Sets the TCP minimum round trip
time.
Sets the TCP default initial round
trip time.
Drops the TCP connection of the
specified TCP Control Block.
Sets a TCP output window limit.
Inputs the TCP Maximum
Segment Size.
Resets the TCP connection of the
specified TCP Control Block.
Sets the round trip time for the
TCP control block.
Displays the TCP statistic
counters.
Turns on/off the option to send
data with the SYN packet.
Turns on/off the trace for
debugging.
Telnets to the specified host.
Sends ICMP packets to trace the
route of a remote host.
Displays the IGMP group table.
22-15