LABEL
Remote DHCP
Enter the IP address(es) of the DHCP server(s).
Server 1.. 3
Add
Click Add to insert the settings as a new entry in the summary table.
Cancel
Click Cancel to reset the fields.
Clear
Click Clear to start configuring the screen again.
17.3 Viewing and Editing DHCP Settings
To view a summary of the DHCP settings, scroll down to the summary table at the bottom of the DHCP screen.
To change the settings of a rule, click a number in the Index field.
The following table describes the labels in the summary table.
LABEL
VID
This field displays the ID number of the VLAN group to which this DHCP settings apply.
Type
This field displays the type of the DHCP mode (Server or Relay) for this entry. None indicates the
rule is inactive.
DHCP Status
This field displays the client IP pool starting address and the size of client IP pool if the Type field
displays Server.
This field displays the IP address of a DHCP server if the Type field is Relay.
Delete
Click Delete to remove the selected entry.
Cancel
Click Cancel to clear the Delete check boxes.
DHCP
Table 17-1 DHCP
Figure 17-2 DHCP: Summary Table
Table 17-2 DHCP: Summary Table
DESCRIPTION
Dimension ES-4024 Ethernet Switch
DESCRIPTION
17-3