ZyXEL Communications dimension ES-4024 User Manual page 151

class
display
l2find
l2set
del
bmstorm
disable
type
display
interval
set
del
mac static
ageSet
Introduction to CLI
Table 22-2 Command Summary: SYS SW
COMMAND
list
<src port> <src MAC> <src vid>
<dest port> <dest MAC> <dest vid>
<src port> <src mac> <src vid><dest
port><dest mac> <dest vid>
<Class Idx>
<dir (ingress/egress)> <type
(broadcast/multicast/both)>
[index]
[value]
<port><threshold><direction>
<index>
disable
display [<mac> <vid>]
set <port> <MAC> <vid>
del <port> <MAC> <vid>
<timeout>
Dimension ES-4024 Ethernet Switch
DESCRIPTION
Lists all profiles in the internal
switch user database.
A class is the basic rule
parameters for a bandwidth
control, port mirror or port filter
rule.
Displays run-time bandwidth
control, port mirror and port filter
rule status.
Find source/destination port,
MAC address and VLAN group
information.
Sets source/destination port,
MAC address and VLAN group
information.
A class is automatically created
when you create a bandwidth
control, port mirror or port filter
rule. This command deletes the
specified class.
These commands relate to
broadcast storm control.
Clears current run-time settings
Specifies the type of frames to
limit in the switch; broadcast,
multicast or both.
Displays broadcast storm control
ports' settings
Sets/displays the monitor interval.
Specifies the packet threshold
and direction (ingress/egress) on
the specified port.
Disables broadcast storm control
on this port.
Displays static MAC addresses.
Clears current run-time static
MAC address settings
Displays current run-time static
MAC addresses on the ports.
Configures a static MAC address
on the specified port.
Deletes a static MAC address on
the specified port.
Sets aging timeout.
22-11