ZyXEL Communications dimension ES-4024 User Manual page 152

Dimension ES-4024 Ethernet Switch
ageView
filter
applyidx
del
disable
display
l2set
mirror
applyidx
del
disable
display
set
port
bw
applyidx
22-12
Table 22-2 Command Summary: SYS SW
COMMAND
<class index>
<Class Idx>
<src port><src mac><src vid><dest
port><dest mac><dest vid>
<Class Idx>
<MirrorType=input|output|both>
<Class Idx>
[class idx]
<src port> <src MAC> <src vid>
<dest port> <dest MAC> <dest vid>
<input|output|both>
<port>
<Class Idx> <Max BW>
DESCRIPTION
Displays the aging timeout period.
The following commands relate to
port filters. Port filtering means
sifting traffic from one or all ports
to one or all ports based on the
source and/or destination MAC
addresses and VLAN group.
Apply class to a filter.
Deletes filter class.
Clears current run-time filters.
Displays current run-time filter
status.
Creates a filter rule using
source/destination port, MAC
address and VLAN group
information. "*" means "any".
The following commands relate to
port mirrors. Port mirroring is
copying traffic from one or all
ports to another or all ports for
external analysis.
Apply class to mirroring.
Delete a mirroring class.
Clears current run-time port
mirror settings.
Displays current run-time port
mirror settings.
Creates a mirror rule using
source/destination port, MAC
address and VLAN group
information. "*" means "any".
Sets the direction of mirrored
traffic.
Sets the mirror port (the port
traffic is copied to for analysis).
The following commands relate to
bandwidth control rules.
Bandwidth control means defining
a maximum allowable bandwidth
for traffic flows from specified
source(s) to specified
destination(s).
Apply class to bandwidth control.
Introduction to CLI