ZyXEL Communications dimension ES-4024 User Manual page 95

LABEL
Active This field indicates whether the bandwidth control rule is enabled (Yes) or disabled (No).
Name This field displays the descriptive name of the rule.
Max. This field displays the maximum bandwidth allowed in kilobits per second (kbps) for the rule.
Bandwidth
Rule This field displays the network layer (Layer 2 or Layer3) to which this rule applies.
Source For Layer 2 rules, this field displays the source port number, the source MAC address with the
VLAN identification number to which the MAC address belongs or a combination of the two.
For Layer 3 rules, this field displays the source port number, the source IP address and the number
of ones in the subnet mask octet or a combination of the two.
All Entries means all IP/MAC addresses from all ports.
Destination For Layer 2 rules, this field displays the destination port number, the destination MAC address with
the VLAN identification number to which the MAC address belongs or a combination of the two.
For Layer 3 rules, this field displays the destination port number, the destination IP address and the
number of ones in the subnet mask octet or a combination of the two.
All Entries means all IP/MAC addresses from all ports.
Delete To delete a rule, select its checkbox in this column and then click the Delete button.
Add To add a rule, click this button.
Delete To delete a rule, select its checkbox in the Delete column and then click this Delete button.
Cancel Click Cancel to begin configuring this screen afresh.
Bandwidth Control
Table 11-2 Bandwidth Control: Summary Table
Dimension ES-4024 Ethernet Switch
DESCRIPTION
11-5