ZyXEL Communications dimension ES-4024 User Manual page 148

Dimension ES-4024 Ethernet Switch
vlan
status
driver
config
count
rstp
bridge
port
22-8
Table 22-2 Command Summary: SYS SW
COMMAND
setentry<name><vid><port><adctl>
<tagctl>
delentry <vid>
active <vid>
inactive <vid>
list
list <all|vid|start_vid end_vid>
disp
clear
enable
disable
priority <priority>
maxage <Max_Age>
hellotime <Hello_Time>
forwardDelay <Forward_Delay_Time>
version <STP:0|RSTP:2>
enable <port_no>
disable <port_no>
pathCost <Port_NO> <Cost|0:Auto>
DESCRIPTION
Applies a static VLAN (name,
admin control tag, tag control) to
a port.
Deletes the specified (VID) static
VLAN.
Turns on the specified static
VLAN.
Turns off the specified static
VLAN.
Displays a table of static VLANs.
Shows the specified IEEE 802.1Q
Tagged VLAN table.
Shows the IEEE 802.1Q tagged
status.
Shows the switch's settings.
Shows the switch Network Driver
Interface Specifications (NDIS)
level counters (CPU interface).
Clears the switch NDIS level
counters (CPU interface).
All "sys sw rstp" commands relate
to rapid STP configuration. Refer
to IEEE Std 802.1w. Use "config
save" to save your configuration
changes.
Enables RSTP.
Disables RSTP.
Sets the system priority.
Sets the max age timer
Sets the hello timer.
Sets the forward delay time
Displays/enables the STP mode;
STP or RSTP. RSTP is the
default used when configuring
STP via web configurator.
Enables RSTP on this port.
Disables RSTP on this port.
Sets the specified port's path
cost.
Introduction to CLI