17.1 About DHCP
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual computers to obtain
TCP/IP configuration at start-up from a server. You can configure the ES-4024 as a DHCP server or disable it.
When configured as a server, the ES-4024 provides the TCP/IP configuration for the clients. If you disable the
DHCP service, you must have another DHCP server on your LAN, or else the computer must be manually
configured.
17.1.1
DHCP modes
The ES-4024 can be configured as a DHCP server or DHCP relay agent.
•
If you configure the ES-4024 as a DHCP server, it will maintain the pool of addresses and distribute them
to your LAN computers.
•
If there is an Ethernet device that performs the DHCP server function for your network, then you can
configure the ES-4024 as a DHCP relay agent. When the ES-4024 receives a request from a computer on
your network, it contacts the Ethernet device for the necessary IP information, and then relays the
assigned information back to the computer.
17.2 Configuring DHCP
Click Advanced Application and then DHCP in the navigation panel to display the screen as shown next.
DHCP
This chapter shows you how to configure the DHCP feature.
Dimension ES-4024 Ethernet Switch
Chapter 17
DHCP
17-1