ZyXEL Communications dimension ES-4024 User Manual page 75

LABEL
Incoming These are the ingress ports; an ingress port is an incoming port, that is, a port through which a
data packet enters. If you wish to allow two subscriber ports to talk to each other, you must define
the ingress port for both ports. The numbers in the top row denote the incoming port for the
corresponding port listed on the left (its outgoing port). CPU refers to the switch management
port. By default it forms a VLAN with all Ethernet ports. If it does not form a VLAN with a particular
port then the switch cannot be managed from that port.
Outgoing These are the egress ports; an egress port is an outgoing port, that is, a port through which a
data packet leaves. If you wish to allow two subscriber ports to talk to each other, you must define
the egress port for both ports. CPU refers to the switch management port. By default it forms a
VLAN with all Ethernet ports. If it does not form a VLAN with a particular port then the switch
cannot be managed from that port.
Apply Click Apply to save the changes.
Cancel Click Cancel to start configuring the screen again.
VLAN
Table 7-6 Port Based VLAN Setup
DESCRIPTION
Dimension ES-4024 Ethernet Switch
7-9