Dimension ES-4024 Ethernet Switch
24.8.1
VLAN1Q VLAN STATUS
Syntax:
sys sw vlan1q vlan status
This command displays the current configuration of the IEEE 802.1Q VLAN.
See the following example shows the default VLAN settings. The default VLAN allows all ports to connect to each
other and sets them to send untagged packets.
24-10
ES-4024> sys sw vlan1q status
802.1Q VLAN Setup :
GVRP = Enable
Managament VLAN ID = 1
Figure 24-16 VLAN1Q VLAN STATUS Command Example
IEEE 802.1Q Tagged VLAN