ZyXEL Communications dimension ES-4024 User Manual page 149

lacp
agg
port
dot1x
Introduction to CLI
Table 22-2 Command Summary: SYS SW
COMMAND
priority <Port_NO> <Priority>
edgeport <port_no>
p2pLink <Port_NO>
<Auto:2|True:1|False:0>
mcheck <Port_NO>
enable <port_no>
disable <port_no>
status <port_no>
actoradm activity [port_no]
[0:passive 1:active]
actoradm display [port_no]
actoradm key [port_no][key]
actoradm priority
[priority]
actoradm timeout [port_no]
[0:long_timeout|1:short_timeout]
status <Port_NO>
keymgnt [on|off]
syspriority <priority>
trace
Dimension ES-4024 Ethernet Switch
[port_no]
DESCRIPTION
Displays the specified port's
priority.
Displays if this port is an edge
port.
Displays whether the specified
port can connect to one bridge or
multiple bridges.
Enables the Port Protocol
Migration state machine
(Disabled, Blocking, Listening,
Learning, Forwarding) on the
specified port.
Refer to IEEE 802.3ad for more
information on link aggregation
control protocol.
Displays ports trunked using
LACP.
Enables LACP on the specified
port.
Disables LACP on the specified
port.
Displays whether LACP is
enabled on the specified port.
Allows/disallows the specified
local port to engage in trunking.
Shows whether the specified local
port is engaged in trunking.
Shows the specified local port
LACP key.
Shows the specified local port
LACP priority.
Enables a short or long timeout
on the specified local port.
Displays LACP status on a port.
Turns LACP key management on
or off.
Sets the LACP system priority.
The switch with the lowest priority
becomes the LACP "server".
Sets the LACP debug level.
"sys sw dot1x" commands relate
to IEEE 802.1X security.
22-9