Console Port Speed - ZyXEL Communications ZyWALL 110 User Manual

Click Apply.
7
To get the ZyWALL/USG date and time from a time server
Click System > Date/Time.
1
Select Get from Time Server under Time and Date Setup.
2
Under Time Zone Setup, select your Time Zone from the list.
3
As an option you can select the Enable Daylight Saving check box to adjust the ZyWALL/USG
4
clock for daylight savings.
Under Time and Date Setup, enter a Time Server Address
5
Click Apply.
6

36.5 Console Port Speed

This section shows you how to set the console port speed when you connect to the ZyWALL/USG via
the console port using a terminal emulation program.
Click Configuration > System > Console Speed to open the Console Speed screen.
Figure 455 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 301 Configuration > System > Console Speed
LABEL
Console Port Speed
Apply
Reset
Chapter 36 System
DESCRIPTION
Use the drop-down list box to change the speed of the console port. Your ZyWALL/USG
supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the console port.
The Console Port Speed applies to a console port connection using terminal emulation
software and NOT the Console in the ZyWALL/USG Web Configurator Status screen.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
673
(Table 300 on page 672).