What You Need To Know; Address Summary Screen - ZyXEL Communications ZyWALL 110 User Manual

• Use the Address Group summary screen
Group Add/Edit screen, to maintain address groups in the ZyWALL/USG.

35.6.1 What You Need To Know

Address objects and address groups are used in dynamic routes, security policies, application
patrol, content filtering, and VPN connection policies. For example, addresses are used to specify
where content restrictions apply in content filtering. Please see the respective sections for more
information about how address objects and address groups are used in each one.
Address groups are composed of address objects and address groups. The sequence of members in
the address group is not important.

35.6.2 Address Summary Screen

The address screens are used to create, maintain, and remove addresses. There are the types of
address objects.
• HOST - a host address is defined by an IP Address.
• RANGE - a range address is defined by a Starting IP Address and an Ending IP Address.
• SUBNET - a network address is defined by a Network IP address and Netmask subnet mask.
The Address screen provides a summary of all addresses in the ZyWALL/USG. To access this
screen, click Configuration > Object > Address > Address. Click a column's heading cell to sort
the table entries by that column's criteria. Click the heading cell again to reverse the sort order.
Figure 407 Configuration > Object > Address > Address
The following table describes the labels in this screen. See
information as well.
Table 262 Configuration > Object > Address > Address
LABEL
IPv4 Address Configuration
Add
Edit
Remove
Object
References
#
Chapter 35 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific address.
ZyWALL/USG Series User's Guide
613
(Section 35.6.2.3 on page
Section 35.6.2.1 on page 614
616) and the Address
for more