ZyXEL Communications ZyWALL 110 User Manual page 102

Figure 87 Dashboard > Interface Status Summary
This table describes the fields in the above screen.
Table 29 Dashboard > Interface Status Summary
LABEL
Name
Status
Chapter 5 Dashboard
DESCRIPTION
This field displays the name of each interface.
This field displays the current status of each interface. The possible values
depend on what type of interface it is.
For Ethernet interfaces:
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface does not have any physical ports associated with
it or the Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field
displays the port speed and duplex setting (Full or Half).
For cellular (mobile broadband) interfaces, see
status that can appear.
For the auxiliary interface:
Inactive - The auxiliary interface is disabled.
Connected - The auxiliary interface is enabled and connected.
Disconnected - The auxiliary interface is not connected.
For PPP interfaces:
Connected - The PPP interface is connected.
Disconnected - The PPP interface is not connected.
If the PPP interface is disabled, it does not appear in the list.
For WLAN interfaces:
Up - The WLAN interface is enabled.
Down - The WLAN interface is disabled.
ZyWALL/USG Series User's Guide
102
Section 6.10 on page 122 for the