Chapter 36 System; Overview; What You Can Do In This Chapter - ZyXEL Communications ZyWALL 110 User Manual

36.1 Overview

Use the system screens to configure general ZyWALL/USG settings.

36.1.1 What You Can Do in this Chapter

• Use the System > Host Name screen (see
name for the ZyWALL/USG in your network.
• Use the System > USB Storage screen (see
settings for the connected USB devices.
• Use the System > Date/Time screen (see
time for the ZyWALL/USG.
• Use the System > Console Speed screen (see
console port speed when you connect to the ZyWALL/USG via the console port using a terminal
emulation program.
• Use the System > DNS screen (see
Name System) server used for mapping a domain name to its corresponding IP address and vice
versa.
• Use the System > WWW screens (see
or HTTPS access to the ZyWALL/USG and how the login and access user screens look.
• Use the System > SSH screen (see
used to securely access the ZyWALL/USG's command line interface. You can specify which zones
allow SSH access and from which IP address the access can come.
• Use the System > TELNET screen (see
the ZyWALL/USG's command line interface. Specify which zones allow Telnet access and from
which IP address the access can come.
• Use the System > FTP screen (see
can be used to access the ZyWALL/USG. You can also specify from which IP addresses the access
can come. You can upload and download the ZyWALL/USG's firmware and configuration files
using FTP. .
• Your ZyWALL/USG can act as an SNMP agent, which allows a manager station to manage and
monitor the ZyWALL/USG through the network. Use the System > SNMP screen (see
36.11 on page
access the ZyWALL/USG. You can also specify from which IP addresses the access can come.
• Use the Auth. Server screen
operate as a RADIUS server.
• Use the CloudCNM screen
the ZyWALL/USG by a Central Network Management system.
• Use the System > Language screen (see
ZyWALL/USG's Web Configurator screens.
C
Section 36.6 on page
Section 36.7 on page
Section 36.8 on page
Section 36.10 on page
707) to configure SNMP settings, including from which zones SNMP can be used to
(Section 36.12 on page
(Section 36.13 on page
ZyWALL/USG Series User's Guide
667
HAPTER
Section 36.2 on page
Section 36.3 on page
Section 36.4 on page 669) to configure the date and
Section 36.5 on page
674) to configure the DNS (Domain
683) to configure settings for HTTP
700) to configure SSH (Secure SHell)
Section 36.9 on page 704) to configure Telnet to access
706) to specify from which zones FTP
712) to configure the ZyWALL/USG to
714) to enable and configure management of
Section 36.14 on page
3 6
System
668) to configure a unique
668) to configure the
673) to configure the
Section
716) to set a language for the