Log Setting Summary - ZyXEL Communications ZyWALL 110 User Manual

to the specific destinations. You can also have the ZyWALL/USG store system logs on a connected
USB storage device. The other four logs are stored on specified syslog servers.
The Log Setting screens control what information the ZyWALL/USG saves in each log. You can also
specify which log messages to e-mail for the system log, and where and how often to e-mail them.
These screens also set for which events to generate alerts and where to email the alerts.
The first Log Setting screen provides a settings summary. Use the Edit screens to configure
settings such as log categories, e-mail addresses, and server names for any log. Use the Log
Category Settings screen to edit what information is included in the system log, USB storage, e-
mail profiles, and remote servers.

37.3.1 Log Setting Summary

To access this screen, click Configuration > Log & Report > Log Setting.
Figure 503 Configuration > Log & Report > Log Setting
The following table describes the labels in this screen.
Table 326 Configuration > Log & Report > Log Setting
LABEL
Edit
Activate
Inactivate
#
Name
Chapter 37 Log and Report
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you can modify it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific log.
This field displays the type of log setting entry (system log, logs stored on a USB storage
device connected to the ZyWALL/USG, or one of the remote servers).
ZyWALL/USG Series User's Guide
723