Table 249 Configuration > Object > AP Profile > SSID > Add/Edit SSID Profile (continued)
LABEL
Hidden SSID
Enable Intra-BSS
Traffic Blocking
Local VAP
Setting
VLAN Support
OK
Cancel
35.3.2.3 Security List
This screen allows you to manage wireless security configurations that can be used by your SSIDs.
Wireless security is implemented strictly between the AP broadcasting the SSID and the stations
that are connected to it.
To access this screen click Configuration > Object > AP Profile > SSID > Security List.
Note: You can have a maximum of 32 security profiles on the ZyWALL/USG.
Figure 393 Configuration > Object > AP Profile > SSID > Security List
The following table describes the labels in this screen.
Table 250 Configuration > Object > AP Profile > SSID > Security List
LABEL
Add
Edit
Remove
Object Reference Click this to view which other objects are linked to the selected security profile (for
#
Chapter 35 Object
DESCRIPTION
Select this if you want to "hide" your SSID from wireless clients. This tells any wireless
clients in the vicinity of the AP using this SSID profile not to display its SSID name as a
potential connection. Not all wireless clients respect this flag and display it anyway.
When an SSID is "hidden" and a wireless client cannot see it, the only way you can connect
to the SSID is by manually entering the SSID name in your wireless connection setup
screen(s) (these vary by client, client connectivity software, and operating system).
Select this option to prevent crossover traffic from within the same SSID.
This part of the screen only applies to ZyWALL/USG models that have built-in wireless
functionality (AP) - see
Table 1 on page
Select On to have the ZyWALL/USG assign the VLAN ID listed in the top part of the screen
to the built-in AP.
Select Off to have the ZyWALL/USG ignore the VLAN ID listed in the top part of the screen.
Select an Outgoing Interface to have the ZyWALL/USG assign an IP address in the same
subnet as the selected interface to the built-in AP.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to add a new security profile.
Click this to edit the selected security profile.
Click this to remove the selected security profile.
example, SSID profile).
This field is a sequential value, and it is not associated with a specific profile.
ZyWALL/USG Series User's Guide
21.
596