The Ssl Global Setting Screen - ZyXEL Communications ZyWALL 110 User Manual

Table 175 VPN > SSL VPN > Access Privilege > Add/Edit (continued)
LABEL
Network List
OK
Cancel

23.3 The SSL Global Setting Screen

Click VPN > SSL VPN and click the Global Setting tab to display the following screen. Use this
screen to set the IP address of the ZyWALL/USG (or a gateway device) on your network for full
tunnel mode access, enter access messages or upload a custom logo to be displayed on the remote
user screen.
Figure 279 VPN > SSL VPN > Global Setting
Chapter 23 SSL VPN
DESCRIPTION
To allow user access to local network(s), select a network name in the Selectable
Address Objects list and click the right arrow button to add to the Selected Address
Objects list. You can select more than one network.
To block access to a network, select the network name in the Selected Address Objects
list and click the left arrow button.
Click OK to save the changes and return to the main Access Privilege screen.
Click Cancel to discard all changes and return to the main Access Privilege screen.
ZyWALL/USG Series User's Guide
425