Address Overview - ZyXEL Communications ZyWALL 110 User Manual

35.5.2.1 Add Application Group Rule
Click Add in Configuration > Object > Application > Application Group to select already
created application rules and combine them as a single new rule.
Figure 406 Configuration > Object > Application > Application > Add Application Group Rule
The following table describes the labels in this screen.
Table 261 Configuration > Object > Application > Application > Add Application Group Rule
LABEL
Name
Description
Member List
OK
Cancel

35.6 Address Overview

Address objects can represent a single IP address or a range of IP addresses. Address groups are
composed of address objects and other address groups.
• The Address screen
ZyWALL/USG. Use the Address Add/Edit screen to create a new address or edit an existing
one.
Chapter 35 Object
DESCRIPTION
Enter a name for the group. You may use 1-31 alphanumeric characters, underscores(
or dashes (-), but the first character cannot be a number. This value is case-sensitive.
This field displays the description of each group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
The Member list displays the names of the application and application group objects that
have been added to the application group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
(Section 35.6.2 on page
ZyWALL/USG Series User's Guide
613) provides a summary of all addresses in the
612
),
_