ZyXEL Communications ZyWALL 110 User Manual page 715

• Perform Site-to-Site, Hub & Spoke, Fully-meshed and Remote Access VPN provisioning.
To allow CloudCNM management of your ZyWALL/USG:
• You must have a CloudCNM license with CNM ID number or a CloudCNM URL identifying the
server.
• The ZyWALL/USG must be able to communicate with the CloudCNM server.
You must configure Configuration > System > CloudCNM to allow the ZyWALL/USG to find the
CloudCNM server.
Figure 497 Configuration > System > CloudCNM
The following table describes the labels in this screen.
Table 319 Configuration > System > CloudCNM
LABEL DESCRIPTION
Show Advanced Click this button to display a greater or lesser number of configuration fields.
Settings / Hide
Advanced Settings
Enable Select this to allow management of the ZyWALL/USG by CloudCNM.
Auto Select this if your CloudCNM server can access MyZyXEL.com and you have a CNM
ID from the CloudCNM license.
CNM ID Enter the CNM ID exactly as on the CloudCNM license.
CNM URL MyZyXEL.com associates the CNM ID with the CNM URL which identifies the server
on which CloudCNM is installed. Therefore you don't need to enter the CNM URL when
you select Auto.
Custom Select this if your CloudCNM server cannot access MyZyXEL.com.
CNM URL If your ZyWALL/USG server cannot access MyZyXEL.com, then select Custom and
enter the IPv4 IP address of the CloudCNM server followed by the port number
(default 7547 for HTTPS or 7549 for HTPP) in CNM URL. For example, if you installed
CloudCNM on a server with IP address 1.1.1.1, then enter 1.1.1.1:7547 or
1.1.1.1:7549 as the CNM URL.
Transfer Protocol Choose the CNM URL protocol: HTTP or HTTPS. If you enter 1.1.1.1:7547 as the
CNM URL, you must choose HTTPS as the Transfer Protocol, and then the whole
CNM URL is https://1.1.1.1:7547. If you enter 1.1.1.1:7549 as the CNM URL, you
must choose HTTP as the Transfer Protocol, and then the whole CNM URL is http:/
/1.1.1.1:7549.
Chapter 36 System
ZyWALL/USG Series User's Guide
715