ZyXEL Communications ZyWALL 110 User Manual page 384

Hide thumbs Also See for ZyWALL 110:

Table of Contents

Figure 256 Limited LAN to WAN IRC Traffic Example

Your security policy would have the following configuration.

Table 161 Limited LAN1 to WAN IRC Traffic Example 1

• The first row allows the LAN1 computer at IP address 172.16.1.7 to access the IRC service on the

• The second row blocks LAN1 access to the IRC service on the WAN.

• The third row is the default policy of allowing all traffic from the LAN1 to go to the WAN.

Alternatively, you configure a LAN1 to WAN policy with the CEO's user name (say CEO) to allow IRC

traffic from any source IP address to go to any destination address.

Your Security Policy would have the following settings.

Table 162 Limited LAN1 to WAN IRC Traffic Example 2

• The first row allows any LAN1 computer to access the IRC service on the WAN by logging into the

ZyWALL/USG with the CEO's user name.

• The second row blocks LAN1 access to the IRC service on the WAN.

• The third row is the default policy of allowing allows all traffic from the LAN1 to go to the WAN.

The policy for the CEO must come before the policy that blocks all LAN1 to WAN IRC traffic. If the

policy that blocks all LAN1 to WAN IRC traffic came first, the CEO's IRC traffic would match that

policy and the ZyWALL/USG would drop it and not check any other security policies.

Chapter 21 Security Policy

ZyWALL/USG Series User's Guide

Show Quick Links

Table of Contents

Troubleshooting